2013-2018 Avalon Rear Sway bars are the same part # 4881206210, as similar year Camry Anti Sway Bars

The RSB part number for the camry, avalon and avalon touring is 4881206210.

Comments

Post a Comment

Popular posts from this blog

Rear Sway Bar for 2016 Avalon and Driving Impressions

Avalon, Camry Sway Bar Install The RSB part number for the camry, avalon and avalon touring is 4881206210: I used this sway bar from progress  which is significantly heavier and stiffer despite being only 3 mm larger than stock.  (Check out Progress Install Instructions ) The bar installed fairly easily.  I woke up early on an early spring morning, fired up the air compressor, got the Aircat ready to break free any stuck bolts, and to my great surprise everything came apart with hand tools and without drama. I jacked the car up with a floor jack then laid it down on a few rows of bricks to put some load on the suspension.  Taking apart the links needed a 14mm and a 6mm Allen wrench, break it free first with the 14 then use the 14 plus six to get it all the way off.  I would recommend taking a few pictures of the oem sway bar in place to get an idea of how the new one will be oriented. Then there are the sway bar mounts which are also 14mm IIRC and they...
Read more

How to use dynamat. Dynamat install on a Toyota Avalon

Image
I actually did not use but Rockville sound deadener which I actually like quite a bit.  I have used fatmat, norcool or whatever and certain other products and have always preferred dynamat extreme.  I have learned to always select sound deadener with butyl rubber compound versus asphalt.  I was thinking about the NVX product but I choose Rockville as it had better reviews.   This product was competitively priced, used butyl rubber compound, had good reviews. I have thus far only installed it in two places, this review is limited as I do not have any comments about it's long term use. So the Avalon has some issues with rattles, especially when the stereo is turned up.  There is a TSB regarding the issue.  So once I upgraded the speakers in the front door to 6x9s infinity reference's speakers the issue of rattling was horrible.  With the bass turned up just one notch, or any volume on the head unit over about 38-40 the doors would rattle...
Read more

Complete upgrade of the 2013-2018 Toyota Avalon audio system

Image
As I mentioned in my post reflecting on the Wireless Apple CarPlay Experience , I finished upgrading my 2016 Toyota Avalon stereo with the addition of a wireless CarPlay and Android Auto Pioneer W8400NEX, a 5-channel infinity 4555a amplifier delivering an anticipated but not measured 260 watts RMS into the 4x Infinity Reference 3-way 6x9's and the 4 2-way Infinitey Reference 3.5" speakers that are located on the drivers door and rear deck, as well as the front dash and rear seats door panels respectively.  The subwoofer channel on the infinity 4555a amplifier was driving a newly added 2-ohm selected (4-ohm option) Infinity Kappa 1200 subwoofer with 500 watts rms. The 4555a seems much more sensitive on the 4-channel full spectrum side, or at least through the speakers tested, and  needed no increase in the gain vs. the subwoofer which was measured to clip, using the buzz method of listening at 100hz, at 1/3, or "10-clock position" on the gain dial  Also intere...
Read more